The Process

Step 1: Shorten the nail to desired length using an electric nail machine with a medium or coarse carbide tip on all 10 fingernails.Step 2: With fine sandpaper drum or file remove all excess cuticle and shine of the nail.Step 3: Apply prep liquid to the nails on all 10 fingernailsStep 4: Apply ProBase on the entire nail. Rebrush using a back-and-forth motion. It is important that the gel stays even on the nail.

Step 5: Dip in filler powder and tap finger to remove excess powder. Reapply a very thin coat of ProBase to the areas where you need to add thickness and dip in filler powder and tap finger to remove excess powder.

Step 6: Apply a medium coat of ProBase on the entire nail then fan dry. Repeat the same steps for all fingers.

Step 7: Apply the activator liquid to the entire nail on all 10 fingernails, Fan cure for 30 seconds.

Step 8: Shape the side of the nail with a medium file to your clients preference.

Step 9: Using a nail machine with a fine bit, file around the cuticle area and contour file the nail to shape and remove imperfections.

Step 10: Buff all 10 fingernails. Have the client wash her hands and dry thoroughly before the next step.

Step 11: Apply the activator liquid to the entire nail on all 10 fingernails, Fan cure for 30 seconds.

Step 12: Apply a thin layer of finish gel as quickly as possible. Then repeat with a second coat, Fan dry each hand for 60 seconds.

Step 13: Apply nail Nourisher around cuticle.

  process_img1
 process_img2
 process_img3